|
LBCarCo stocks or can order the following parts for the TR6 Fuel, Intake & Emissions. Click on the part for pricing and ordering information.
TR6 Fuel, Intake & Emissions
- ABSORPTION CANISTER MGB,MID,SPIT,TR7, TR 6
- ADAPTOR MANIFOLD TR250,6
- ADAPTOR VAC ADVANCE TR 5/250/6
- ADJUSTING SCREW TR
- ADJUSTING SCREW, CARB NEEDLE SOME ZENITH-STROMBERG
- ANTI RUN-ON VALVE MGB,MID, 68-,TR7 -JAG
- BELLCRANK LEVER
- BELT, AIR PUMP TR6
- BEZEL, CHOKE CABLE TR6
- BOLT, 5/16 UNF X 3/4
- BOLT, AIR FILTER MOUNT MULTI-MARQUE
- BOLT, CARB BELLCRANK LEVER TRI, TRS
- BOLT, HEX, 1/4 UNF X 1 VARIOUS
- BOLT, MANIFOLD TR 250/6 , AH
- BUSHING KIT, ACCEL SHAFT TR250-6
- BUSHING, ACCELERATOR SHAFT GT6,TR250,TR6
- BUSHING,POLY,THROTTLE PIVOT TR250-6
- BYPASS VALVE ASSY C3371 TR 5/250/6
- CABLE, CHOKE, OE TYPE, W/KNOB TR250, TR6 THROUGH 1972
- CABLE, CHOKE, OE TYPE, W/KNOB TR6 1972-76 (CHOKE ON KNOB)
- CARB CONV KIT, WEBER DOWNDRAFT TR6
- CARB CONV KIT,WEBER 3X40DCOE TR 250, TR6 THROUGH 71
- CARB CONV KIT,WEBER 3X40DCOE TR6 72-76
- CARB CONVERSION KIT, TWIN HS6 TR 250/6
- CARB CONVERSION KIT, TWIN HS6 TR 250/6
- CARB CONVERSION, TWIN HS6 TR 250/6
- CARB KIT, WBR DWNDRFT, RECON TR6
- CARB REBUILD KIT MGB 75-,TR7 75-78
- CHAMBER COVER SCREW, W/WASHER - STROMBERG CARBS IN STOCK LIMITED SUPPLY
- CHECK VALVE SPIT, MID 75-, TR6
- CHECK VALVE, AFTERMARKET MGB 68-,MID 68-74
- CLAMP, HOSE MGA, MGB, TR5/250/6
- CLAMP, MANIFOLD TR250,TR6,MIDG 75-
- CLIP
- CLIP
- CLIP MULTI TR
- CLIP TR 5/250/6
- CLIP TR250,TR6
- CLIP PETROL PIPE TR6
- CLIP, FUEL LINES TR6
- CLIP, CHOKE CABLE
- CLIP, VAC PIPE TO FUEL PIPE MULTIPLE TR'S
- CLIP-PIPE TO FRAME TR4A-6
- COMPRESSION SLEEVE 1/4 IN TUBE FOR FUEL LINE 1/4 IN OD
- COMPRESSION SLEEVE, 5/16 TUBE FOR TUBING 5/16inch OD
- CONNECTOR C81
- CONNECTOR MULTIPLE TR'S
- CONNECTOR, 90 DEG ELBOW MG, TR250, 69 TR6, CMI
- CONNECTOR, 90 DEG ELBOW SPIT,TR6, TR7
- CONNECTOR, ELBOW TR'S 75-,MIDG 75-
- CONNECTOR, ELBOW TRIUMPH
- CONNECTOR, RUBBER, VAC PIPE AHY, MGB, SPM, TRI, CLASSIC MINI
- CONNECTOR, TEE
- CONNECTOR, TEE
- CONNECTOR, TEE
- CONTROL ROD, ACCELERATOR TR6
- COTTER PIN, 3/32 X 1 -1/2 AHY, SPM, TRI, TRS
- COVER TEMP COMP MULTIPLE TR'S, JAG
- DAMPER ASSY MGB,JAG 75-
- DAMPER ASSY STROM.CD175 75-
- DIAPHRAGM KIT, ZS BYPASS VALVE - STROMBERG CARBURETORS IN STOCK LIMITED SUPPLY
- DIAPHRAGM SCREW MGB, TRS
- DIAPHRAGM, EMISSION VALVE MGB,SPM,SPIT,TR6
- DIAPHRAGM, ZS CARB LATER 175CD ZS CARB
- END LINK, THROTTLE LINK ROD TR2-6
- FELT STRIP, 39
- FELT, GAS TANK MOUNT
- FILTER, AIR SPIT 71 ON, TR250, TR6 (OE HOUSING)
- FILTER, AIR, K&N, 1.75 TALL - (SAME AS KNN56-1620) 175 CD ZS CARBS
- FILTER, AIR, K&N, 3.25 TALL HS6 SU CARBS (1-3/4)
- FILTER, AIR, SUPERFLO,175ZS 175 CD ZENITH STROMBERG CARB
- FILTER, AIR, WEBER, 1-3/4 IN MGB, TR 5/250/6
- FILTER, AIR,K&N,DEEP 175CD MULTI-MARQUE, BRITISH
- FILTER, FUEL, FOR 5/16 IN HOSE - MGB RD & GT 74.5-ON, TR IN STOCK LIMITED SUPPLY
- FILTER,FUEL, 5/16 HOSE, PLAST SUG 377-310 MGB RD & GT 74.5 ON, TR
- FLAME TRAP
- FLASHER, 2 SPADE TERM, W/BRKT MGB, SPM, SP7, CMI, TR6, NEGATIVE GROUND ONLY
- FLOAT ASSY, PREMIUM ZENITH STROMBERG CARBS - NOT TR4-4A
- FLOAT VALVE, GROSE TYPE, Z-S TR7, MGB 75-
- FLOAT, GAS TANK UNIT, BRASS ALL SMITHS TYPE SENDING UNITS
- FUEL PIPE KIT (CARBURETTORS) TR250, TR6 (WITH CARBS)
- FUEL PUMP, 6 CYL, PREMIUM TR250, TR6, GT6
- FUEL TANK, ALLOY, W/VENT KIT (Oversize part fee $15) TRIUMPH TR4-6
- FUEL TANK, STEEL (Oversize part fee $10) LATE TR4 THRU EARLY TR6
- FUEL TRAP
- GAS CAP TR MULTIPLE Currently unavailable
- GAS CAP, LOCKING MULTI-MARQUE
- GAS CAP, LOCKING TR2-6
- GASKET SET, FUEL SENDER, 2 PCS SMITHS FUEL SENDING UNITS
- GASKET SET, FUEL SENDER, 2 PCS USE 293-401 SMITHS FUEL SENDING UNITS
- GASKET STARTER BOX
- GASKET, BYPASS VALVE ZS CARB
- GASKET, BYPASS VALVE ZS CARB
- GASKET, CARB TO AIR CLEANER MGB, TRS W/ZS CARB
- GASKET, CARB TO MANIFOLD TR250/6
- GASKET, EXHAUST FLANGE TR6 72-
- GASKET, FLOAT CHAMBER 175CD2 IN STOCK LIMITED SUPPLY
- GASKET, FUEL PUMP TR'S,MIDGET 75-
- GASKET, FUEL PUMP TR250 & 6, MIDGET 1500, SPIT 1500
- GASKET, FUEL SENDER, CORK AHY, JAG, MGA, MGB, MGT, SPM, TRI, TRS
- GASKET, MANIFOLD SUG 695-080 TR6 72- ,GT6 MK2, MK3, ALL P.I.
- GASKET, MANIFOLD, HI-PERF TR250/6 TO CC75000
- GASKET, MANIFOLD, HP SUG 695-060 TR6 FROM CC75001 Currently unavailable
- GEAR SET, INPUT SHAFT TR3A(TS26825-) - TR6 (-CD20281)
- GROMMET, FILLER CAP TR250-6
- GROMMET, FILLER CAP TR3A-4A
- GROMMET, GAS TANK DRAIN
- HEADER, EXHAUST, 2 PIECE TR250, TR6
- HEAT SHIELD, ALUMINUM TR6 72-76, ZS CARBS
- HEATSHIELD, STAINLESS STEEL TR250/6 W/ZS OR HS6 CARBS
- HEATSHIELD, STAINLESS, WEBER WEBER 40,42,45 DCOE
- HOSE
- HOSE
- HOSE
- HOSE
- HOSE
- HOSE
- HOSE TR6
- HOSE CLAMP TR 5/250/6
- HOSE CONNECTING TR6
- HOSE ELBOW, TO FRONT CARB TR250/6
- HOSE, 11/32 X 1.75 IN TR250-6
- HOSE, BREATHER TR6
- HOSE, FUEL FILLER, 2-3/8inch OD MGA, TR2,3,4,4A, 250, 6
- HOSE, FUEL, 5/16 ID, 6 INCH TR
- HOSE, INTAKE MANIFOLD FEED TR250, TR6 THRU 1971
- HOSE, INTAKE MANIFOLD FEED TR250, TR6 THRU 1971, SPITFIRE
- HOSE, INTAKE MANIFOLD FEED TR6 1972-76
- HOSE, INTAKE MANIFOLD FEED TR6 1972-76
- HOSE, INTAKE MANIFOLD RETURN TR250-6
- HOSE, INTAKE MANIFOLD RETURN TR250-6
- HOSE, PIPE TO CARB FITTINGS TR2-EARLY TR6
- HOSE, T FITTING TO VALVE COVER TR250-6, SPECIAL ORDER, PRICE MAY VARY
- HOSE, T TO CANISTER
- HOSE, VACUUM, 11/32 IN
- HOSE, VACUUM, BLK PLASTIC BY FOOT DIST ADVANCE, EGR VAC LINES, ETC
- HOSE,T FITTING TR6
- INSULATING PAD SET MGB ALL
- INSULATOR, CARB TO MANIFOLD TR250/6
- JET NEEDLE, ADJUSTABLE, B1AF TR6
- JET NEEDLE, BAG TR6 HS6 CONVERSION
- JET NEEDLE, FIXED, B1AF TR 250/6
- JET NEEDLE, FIXED, B2Y
- KNOB, CHOKE TR250-6 68-72
- KNOB, CHOKE TR6 73-76
- LEVER, THROTTLE STOP
- LINKAGE SET, ACCELERATOR TR250-6
- LOCK PLATE
- MANIFOLD WATER PIPE
- MASTER REBUILD KIT TR6 1970-76
- NEEDLE AND SEAT TR4- 6
- NUT, 3/8 UNF, G5, HIGH NUT MGB & MGA & SPM
- NUT, 4BA, PLAIN, ZINC AHY, MGA, TRI, TRS
- NUT, 5/16 BSF, ZS CARB ZS CARBS ON TRI, TRS
- NUT, BRASS, 3/8 IN TR2-4, TR6
- NUT, HEX, 10-32, 5/16 AF, G5
- NUT, JAM, 1/4 UNF
- NUT, MANIFOLD TO HEAD TR250-6, SPIT
- NUT, TUBE TR 5/250/6
- NUT, TUBE TR6
- NUT, U-TYPE SPIRE SPM, TRS
- NUT,H/L BUCKET TO FENDER,BRASS HEALEYS W/ 3 ADJ H/L BUCKETS
- O-RING SU & ZS CARBS
- O-RING, VITON, 1.0inchID, 1.25inchOD FOR MOSS 377-305 FUEL FILTER
- O-RING, VITON, 5/8ID, 7/8OD FOR MOSS 377-305 FUEL FILTER ONLY
- O-RING, ZS CARB TR4-6
- O-RING,.25ID,.375OD,VITON MGB MIKUNI CONVERSION KIT
- PAD
- PIN, FLOAT
- PINION SEAL ENV
- PIPE & TUBE NUT W/COMP. SLEEVE TR 250-6, FUEL FILTER TO FUEL PUMP
- PIPE W/NUT, PUMP TO CARB TR2-4A, TR250, 6
- PIPE, HEATER , STAINLESS TR250-6
- PIPE,FUEL LINE TO CARB TO CARB TR4,4A, TR6 (EARLY), GT6
- PLUG & SEAL ZENITH-STROMBERG - VARIOUS
- PLUG DRY SEAL TR5/250/6 & SPM Currently unavailable
- PLUG FLOAT CHAMBER TR 250/6
- PLUG, GAS TANK DRAIN TR2 THROUGH 6, JAGUAR
- PLUG, TANK DRAIN FLARED TR2 THROUGH 6
- REBUILD KIT, 2 CARBS TR250/6
- REBUILD KIT, FUEL PUMP TR2-6 WITH OE OR MOSS 377-000 PUMP
- RETAINING CLIP - ZS CARBS IN STOCK LIMITED SUPPLY
- RETAINING RING
- REVERSE IDLER 1500M(MOD) MIDGET 1500,MARINA
- RING, ANTI RATTLE
- RIVET, 1/8inch DIA AHY, SPS, TRI, TRS
- SCREW AH & TR5/250/6
- SCREW MIXTURE
- SCREW NEEDLE LOCKING MULTIPLE
- SCREW SLOW IDLE
- SCREW SPRING
- SCREW W/ WASHER, LONG ZS FLOAT CHAMBER
- SCREW, 10-32 X 1 1/4, PAN HEAD MULTI-MARQUE
- SCREW, 3/16 X 1/2 IN, SPEC HD
- SCREW, CARB COUPLING
- SCREW, FLOAT BOWL MOUNTING ZENITH-STROMBERG
- SCREW, HEX HEAD, 3/16 BSF MULTIPLE
- SCREW, RND HD, SLOTTED MACHINE
- SEAL & CUP THR SPINDLE 175CD - 175CD CARBS W-5/16inch (8MM) SPINDLES IN STOCK LIMITED SUPPLY
- SEAL KIT, M/C
- SEAL TEM CONTROL SMALL
- SEAL TEMP COMP LARGE
- SEAL, GAS CAP
- SENDING UNIT, FUEL TANK OE TR4-6
- SLEEVE COMPRESSION UNION MULTI-MARQUE, BRITISH
- SPAT BRACKET CLEARANCE ITEM Currently unavailable
- SPRING MULTIPLE TR'S
- SPRING TR
- SPRING IDLE SCREW TR 5/250/6
- SPRING MIX SCREW
- SPRING STARTER BOX
- SPRING THROTTLE RETURN
- SPRING THROTTLE RETURN
- SPRING, CARB PISTON TR, MGB ZS CARBS
- SPRING, CARB SCREW ZS CARB, TR4, TR6 68-73
- STR CONNECTOR SPIT-MID 1500
- STRAP, FIR TREE, 6 1/4 INCH TRIUMPH
- STRAP, FIR TREE, RUBBER,5-INCH
- STRAP, ZIP TIE
- STUD MULTI-MARQUE, BRITISH IN STOCK LIMITED SUPPLY
- STUD, 1 1/4inch LONG OA AHY,TR6 TO (E) CF12500/CR5000, SPM
- STUD, 1 7/8inch LONG OA TR6 FROM (E) CF12500/CR5000
- STUD, 3/8 UNC X 1 7/8
- STUD, 3/8 UNF TR250, SPIT & MIDG 1500
- SUPPORT BRKT TR6
- SUPPORT, SUSPENSION AH 100-6,3000
- TEMPERATURE COMPENSATOR MULTIPLE TR'S, JAG
- THROTTLE LINK ROD ASSEMBLY TR2-6
- TRIMMER SCREW USE 365-945
- TUBE NUT, FOR PIPE 1/4 IN OD FOR LINES THAT ARE 1/4 IN OD
- TUBE NUT, WATER PIPE TR 2-4A, TR250-6, SPITFIRE & MIDGET 1500,
- WASHER
- WASHER MGB
- WASHER, DIAPHRAGM RETAINER Z-S CARBS
- WASHER, FIBER, #10 MGA, MGB, TR2-6
- WASHER, FIBER, 3/8 ID AHY, MGA, MGB, TR2-6
- WASHER, FIBER, 5/8 ID AHY, MGA, MGB, SPM, TR2-6
- WASHER, FLAT, #6, ZINC SPM
- WASHER, FLAT, 3/8 ID, ZINC
- WASHER, INT TOOTH, 5/16 ID MULTIPLE TR'S
- WASHER, LOCK, #6
- WASHER, LOCK, 3/8 STD G8 MULTI-MARQUE, BRITISH
- WASHER, LOCK, INT TOOTH, #10
- WASHER, SPRING, DOUBLE COIL
- WASHER,FLAT, 3/16 ID, 3/4 OD HARDWARE
- WASHER,LOCK, INT TOOTH,1/2 ID
TR6 categories:
We at Little British Car Co and Vintage Motors are dedicated to providing excellent customer service with a "Personal Touch" and quality classic car parts and accessories always at a "substantially lower" price.
|
