|
LBCarCo stocks or can order the following parts for the MGA Clutch, Gearbox & Drivetrain. Click on the part for pricing and ordering information.
MGA Clutch, Gearbox & Drivetrain
- 1ST GEAR/HUB ASSEMBLY MGA, MGB -67
- ADAPTOR, M/CYL TO CLUTCH PIPE MGA, SPM, TR2, TR3 TO TS13045
- AXLE, WIRE WHEEL, 25 SPLINES MGA 1600 FROM (C)82749 WIRE WHEELS, MGB BANJO OUT OF STOCK CAN BE BACK ORDERED WIRE WHEELS
- AXLE, WIRE WHEEL, 26 SPLINES MGA 1600 TO (C)82748 W/WIRE WHEELS WIRE WHEELS
- BALL MULTI-MARQUE
- BALL, 5/16 IN DIA GEARBOX
- BALL, SYNCHRO HUB
- BANJO MG TC, MGA
- BANJO BOLT MGT, MGA
- BEARING
- BEARING MGA,MGB
- BEARING KIT, UNCAGED, LAYSHAFT MGA, MGB TO (E)GB74719 STANDARD, GB74528 O/D
- BEARING SET, NEEDLE ROLLER, 18 MGT, MGA, MGB
- BEARING, GEARBOX - MADE IN UK SUG 071-329 AHY, MGA, MGB -67 Currently unavailable
- BEARING, INPUT SHAFT MGA,MGB -67
- BEARING, PINION HEAD AHY, MGA, MGB, TRI, TR6
- BEARING, PINION HEAD AHY, MGA, MGB, TRI, TR6
- BEARING, PINION, FRONT (TAIL) MGB -66, MGA, SPM
- BEARING, REAR WHEEL HUB AHY, MGA, MGB BANJO AXLE
- BLEEDER SCREW
- BOLT 1/2 IN, W/NYLOCK NUT
- BOLT W/ NUT SET
- BOLT W/NUT SET, DRIVESHAFT MGA, MGB TO (C) 138400 (THRU 67)
- BOLT, 3/8 UNC X 2 MGA FROM (C)21513, MGB
- BOLT, 3/8 UNF X 2 MULTI-MARQUE
- BOLT, 5/16 UNF X 7/8 IN MULTI
- BOLT, CLUTCH FORK PIVOT MGA, MGB ALL, MGC
- BOLT, CROWN WHEEL TO CARRIER AHY BN1 CE 221536 ON -BJ8, MGA, MGB, CLASSIC MINI
- BOLT, HEX, 5/16 UNF X 2 3/4 MGA, MGB, AHY, TRS
- BOOT, CLUTCH LEVER MGA,MGB,SPRIDGET
- BOOT, GEARSHIFT MGA
- BRASS SYNCHRO RING-2ND MGA,MGB -67
- BREATHER AHY, MGA, MGB, SPM
- BUSH, GEAR SHIFT LEVER AHY SIDE SHIFT & CENTER SHIFT GBX, BN2 THRU BJ7
- BUSH, REAR GEARBOX MOUNT MGA
- BUSHING, 2ND GEAR MGA, MGB -67
- BUSHING, CLUTCH FORK SHAFT MGA 1500 FROM (E)4525 THRU MKII, MGB ALL, MGC
- BUSHING, CLUTCH LEVER MGA
- BUSHING, PEDAL MGA, MGB, TRI
- CIRCLIP, GEARSHIFT LEVER AHY, MGA, MGB -67
- CIRCLIP, LAYSHAFT BEARING MGA, MGB -67 (3 SYNCHRO GEARBOX, 0.645
- CLAMP, SHIFTBOOT, CHROME MGA, AH
- CLEVIS PIN, 5/16 X 1/2 MGA,MGB,MIDGET -74
- CLEVIS PIN, 5/16 X 13/16
- CLUTCH ALIGNMENT TOOL MGA 1500/1600,TC, TD
- CLUTCH DISC, 8 INCH, 10 SPLINE MG TD (E)9408 ON, TF, MGA, MAGNETTE 10-SPLINE OUT OF STOCK CAN BE BACK ORDERED (AVAILABLE AS AFTERMARKET - SPEC. ORDER)
- CLUTCH DISC, HEAVY DUTY MGB
- CLUTCH KIT, 3 PIECE MGA 1600 MKII 1622 CC ENGINE -MAY 1961-1962
- CLUTCH KIT, 3 PIECE MGA 1600 MKII 1622 CC ENGINE -MAY 1961-1962
- CLUTCH KIT, 3 PIECE TD FROM (E)9408,TF; MGA 55-61 TO (E)3928; 8inch
- CLUTCH KIT, 3 PIECE SUG 501-050 TD FROM (E)9408,TF; MGA 55-61 TO (E)3928; 8inch Currently unavailable
- CONSOLE COVER
- CONVERSION KIT, 5-SPD MAZDA (Truck Shipment) MGA; 1500 (LOW STARTER)
- CONVERSION KIT, 5-SPD MAZDA (Truck Shipment) MGA; 1800 3 MAIN / 3 SYNC CONVERSION
- CONVERSION KIT, 5-SPD MAZDA (Truck Shipment) MGA; 1800 5 MAIN / 3 SYNC CONVERSION
- CONVERSION KIT, 5-SPD MAZDA (Truck Shipment) MGA; 1800 5 MAIN / 4 SYNC CONVERSION
- CONVERSION KIT, 5-SPD MAZDA (Truck Shipment) MGA; LATE 1500, 1600, 1622 (HIGH STARTER)
- CONVERSION KIT, 5-SPD MAZDA (Truck Shipment) MGA; TWIN CAM / DELUXE
- CONVERSION KIT, T9 5-SPD GBX (Truck Shipment) MGA WITH EARLY 5M MGB ENGINE COMPONENTS
- CONVERSION KIT,T9 5-SPD GBX SUG 440-510 MGA 1500 GB ENGINE, LOW MOUNT STARTER
- CONVERSION KIT,T9 5-SPD GBX SUG 440-511 MGA 1500 GD ENGINE, 1600, 1622
- CONVERSION KIT,T9 5-SPD GBX SUG 440-515 MGA WITH LATE MGB ENGINE & TRANS
- CORE PLUG,DISHED,1-5/16,STEEL AHY, MGA, MGB
- COVER, FUSE BOX JAGUAR
- FLANGE, DIFFERENTIAL PINION MGA, MGB BANJO AXLE
- FLANGE, W/YOKE FOR U-JOINT MGT, MGA, MGB
- GASKET SET, GEARBOX MGA,MGB -67
- GASKET, DIFF CARRIER TO AXLE MGA, MGB -67 BANJO TYPE AXLE
- GASKET, REAR AXLE FLANGE MGA, MGB -67 BANJO TYPE AXLE
- GEAR, DIFFERENTIAL PINION MGA
- GEAR, DIFFERENTIAL, 10 SPLINE MGA 1500
- GEAR, DIFFERENTIAL, 25 SPLINE MGA1600 DISC WHLFROM C82893 , WIRE WHLFROM C82749 CLEARANCE ITEM Currently unavailable
- GEARSHIFT LEVER, 5/16 UNF MGA
- GREASE NIPPLE, STRAIGHT MGT, MGA, MGB
- GREASE NIPPLE, U-JOINT MULTIPLE
- GREEN ARROWS
- HOSE, CLUTCH SLAVE CYLINDER SUG 180-821 TR2-3 TO TS13045, MGA, MGB, SPM 1275
- HOSE, CLUTCH, STAINLESS TR2-3 TO TS13045, MGA, MGB, SPM 1275
- HUB CAP, 9''
- HUB L/H REAR W/WHL - MGA 1500, 1600 IN STOCK LIMITED SUPPLY
- HUB R/H REAR W/WHL MGA 1500, 1600
- HUB, REAR AXLE, DISC WHEEL MGA 1600, W/ DISC WHEELS
- INNER LIGHT RIM
- KEY, WOODRUFF
- KEY, WOODRUFF, 0.125IN WIDE MGT, MGA, MGB, SPM, TR
- KIT, BRAKE / CLUTCH MASTER CYL MGA, SPRIDGET 58-63, TR2-3 TO TS13045
- KIT, BRAKE / CLUTCH MASTER CYL - AFTER MARKET SUG 180-971 MGA, SPRIDGET 58-63, TR2-3 TO TS13045
- KIT, MASTER CYLINDER, 0.625 IN AHY, SPIT,TR7,GT6, MGA, MGC
- KIT,CLUTCH SLAVE CYL MGA, MGB (ALL)
- KNOB, GEARSHIFT, OE TYPE MGA, MGB 63-67
- LAYGEAR MGA, MGB (E) GB74719 STD, GB74528 OD
- LAYGEAR KIT, W/LONG BEARINGS MGA, MGB 1962-MARCH 67 (3-BEARING LAYGEAR)
- LAYSHAFT MGA, MGB 62-67 (0.645inch OD NOMINAL)
- LAYSHAFT, 60-62 HRC MGA, MGB 62-67 (0.645inch OD NOMINAL)
- LOCKBOLT
- LOCKBOLT MGB & MGA
- LOCKBOLT MGB 4 SYNCHRO-AH Currently unavailable
- MAINSHAFT MGA
- MASTER CYLINDER, CLUTCH/BRAKE SPRITE 948 W/DRUM BRAKES, MGA 1500
- MASTER CYLINDER, CLUTCH/BRAKE (AP Brakes) SPRITE 948 W/DRUM BRAKES, MGA 1500
- MASTER CYLINDER, CLUTCH/BRAKE (TRW/Lucas) SUG 180-673 SPRITE 948 W/DRUM BRAKES, MGA 1500
- MASTER CYLINDER,CLUTCH/BRAKE MGA 1600, MK II, 7/8 IN BORE
- MASTER CYLINDER,CLUTCH/BRAKE MGA 1600, MK II, 7/8 IN BORE
- MASTER CYLINDER,CLUTCH/BRAKE (AP Brakes), with correct 'high' cover/reservoir MGA 1600, MK II, 7/8 IN BORE
- NUT G20 K39
- NUT G'BOX MAINSHAFT MGA 1500 FROM (C)20753
- NUT, G/S KNOB LOCKING, CHROME MGA
- NUT, HEX, 5/8 IN X 26 TPI
- NUT, HEX, 7/16 UNF, G8, ZINC
- NUT, JAM, 3/4 UNF, G8, ZINC AHY, MGA, MGB
- NUT, JAM, 3/8 UNF, ZINC AHY, JAG, MGA, MGB, SPM, TRI, TRS, MGC
- NUT, L/H THREAD MGA, MGB -67
- NUT, LH THREADS SPM AXLE, MGA, MGB GEARBOX,
- NUT, NYLOC, 3/8 UNF VARIOUS
- NUT, R/H THREAD MGA, MGB -67
- O-RING, REAR AXLE MGA 1600, MGB
- OIL SEAL AHY, MGT, MGA, MGB-67, SPM
- OIL SEAL MGB -67,BANJO TYPE, AHY, MGA
- OIL SEAL, FRONT GEARBOX MGA FROM (G)A8011, MGB
- OIL SEAL, GBX TAILSHAFT HSG MGA (E)GD101 ON, MGB W/O OVERDRIVE
- OIL SEAL, REAR AXLE USE 120-900 MGB -67 BANJO
- OIL SEAL, STEEL/RUBBER, INTERN MGA 1500 FROM (C)20753 THRU GB ENGINE, JAG, TR8
- OIL SEAL, STEEL/RUBBER/FELT MGA 1500 TO (C)20752, MG ZA, ZB MAGNETTE
- OIL SEAL,SPEEDO PINION HOUSING AHY, MGA, MGB 68-80 ONLY/TR6, JAG
- OUTER SILL, RH 3.8S/420
- PAD, CLUTCH/BRAKE PEDAL MGA, MGB
- PIN, 1/4 X 3/4 MGA
- PIN, DIFFERENTIAL PINION GEAR MGA, MGB
- PIN, GEARSHIFT LEVER RETAINER MG TC, TD, TF, MGA
- PIPE, CLUTCH MGA,MGB THRU 76, MASTER CYL. TO HOSE
- PLUG, DRAIN AHY, MGA, MGB, SPM
- PLUG, GEARBOX DRAIN, MAGNETIC AHY, MGA, MGB, SPM 948-1275
- PLUG, OIL DRAIN/FILLER MGA, MGB, AHY BN1
- PLUNGER, REMOTE CONTROL AHY, MG T, MGA
- POWER UNIT ALL PIRAHNA KITS
- PRESSURE PLATE, 8IN MGT, MGA, MAGNETTE
- PUSH ROD XK150
- PUSHROD, CLUTCH SLAVE CYL MGA, MGB, MIDGET -67, SPIT
- REAR DOOR SKIN, L/H XJ6 & XJ12 SWB
- RELEASE BEARING, CARBON FACE MG TC, TD, TF, MGA, MAGNETTE
- RELEASE BEARING, ROLLER TYPE USE 190-290 MGT, MGA, SPRITE-MIDGET 1275 Currently unavailable
- REPAIR PANEL,FRONT WING,LWR,LH
- RESTRICTOR MGB, SPM
- RETAINER MGA MGB MGT
- RETAINER, RELEASE BEARING MGT, MGA, SPM, AHY
- REVERSE GEAR MGA,MGB -67 CAN BE SPECIAL ORDERED ONLY, LIMITED SUPPLY, PRICE MAY VARY
- RING MGA,MGB -67
- RING AND PINION SET, 10/43 MULTIPLE MG'S
- RING AND PINION SET, 3.70:1 MGA, MGB BANJO AXLE
- RING AND PINION SET, 3.90:1 MGA, MGB 63-65 SPECIAL ORDER
- RING AND PINION SET, 4.55:1 MGA, MGB BANJO AXLE
- SCREW, 1/4 UNF X 5/8 IN MGA, MGB, SPM, TRI, MGC
- SEAT COVERS, REAR, BISCUIT XK150 FHC
- SHIM, .002 MGB -67
- SHIM, .004 MGB -67
- SHIM, DIFF BEARING, .002 AHY, MGA, MGB
- SHIM, DIFF BEARING, .003 MGA, MGB
- SHIM, DIFF BEARING, .004 AHY, MGA, MGB
- SHIM, DIFF BEARING, .006 AHY. MGA. MGB
- SHIM, OUTER PINION BRG, .004 MGA, MGB BANJO TYPE AXLE
- SHIM, OUTER PINION BRG, .006 MGA, MGB BANJO TYPE AXLE
- SHIM, OUTER PINION BRG, .008 MGA, MGB BANJO TYPE AXLE
- SHIM, OUTER PINION BRG, .010 MGA, MGB BANJO TYPE AXLE
- SHIM, OUTER PINION BRG, .012 MGA, MGB BANJO TYPE AXLE
- SHIM, OUTER PINION BRG, .020 MGA, MGB BANJO TYPE AXLE
- SHIM, OUTER PINION BRG, .030 MGA, MGB BANJO TYPE AXLE
- SLAVE CYLINDER, CLUTCH MGA, MGB
- SPACER, DISC WHEEL MGA, MGB -74
- SPACER, REAR AXLE PINION SHAFT MGA, MGB BANJO TYPE AXLE
- SPEEDO SEAL USE 461-445
- SPRING MGB 3 SYNCHRO
- SPRING SPM, MGT, MGA, MGB
- SPRING G/LEVER MGA, MGB -67, TC GEARBOX
- SPRING, GEARBOX DETENT/PLUNGER MGA 1600, 1622, MGB, AHY
- SPRING, PEDAL RETURN MGA,MGB,MIDGET
- SYNCHRO RING, STEEL MGA, MGB -67
- SYNCRO RING 3RD & 4TH MGA, MGB 62-67 (NON-SYNCHRO 1ST GEAR) CAN BE SPEC ORDERED AT HIGHER PRICE OUT OF STOCK CAN BE BACK ORDERED
- TAB WASHER MGA, MGB BANJO TYPE AXLE
- THRUST WASHER, FRONT MGA, MGB 62-67 ( LAYSHAFT)
- THRUST WASHER, REAR, 0.155 IN MGA, MGB 62-67 ( LAYSHAFT, REAR)
- THRUST WASHER, REAR, 0.157 IN MGA, MGB 62-67 ( LAYSHAFT, REAR)
- THRUST WASHER, REAR, 0.160 IN MGA, MGB 62-67 ( LAYSHAFT, REAR)
- THRUST WASHER, REAR, 0.163 IN MGA, MGB 62-67 ( LAYSHAFT, REAR)
- TOOL, CLUTCH ALIGNMENT MGA, MGB
- TRANSMISSION MOUNT, T9 T9 5 SPEED CONVERSIONS
- TUBE, LAYSHAFT BEARING SPACER MGA, MGB TO (E)GB74719 STANDARD, GB74528 O/D
- U-JOINT (NO ZERK) SUG GUJ101-AM SPIT,GT6
- U-JOINT, W/ZERK AFTERMARKET MGT, MGA, MGB, SPM, SPITFIRE, TR7
- WASHER E20
- WASHER MGB -67
- WASHER MGB 4 SYNCHRO
- WASHER FIBRE 1-3/16
- WASHER, COPPER
- WASHER, COPPER MGB, AHY, MGA, MGT, SPM, TRI
- WASHER, COPPER, 0.532 ID MGA, CLUTCH PIPE BANJO ON M/CYL
- WASHER, COPPER, THIN,1.045inch ID MGA SPEEDO PINION HOUSING
- WASHER, LOCK AHY, MGA, MGB
- WASHER, LOCK MGA 1500 FROM (C)20753
- WASHER, LOCK, 3/4 USE 324-100 MULTI-MARQUE
- WASHER, LOCK, EXT TOOTH,5/8 IN
- WASHER, SPRING, 3/4
- WASHER, THRUST, DIFF PINION MGA, MGB
- WASHER, THRUST, DIFF PINION MGA, MGB
- WASHER, THRUST, PINION, .112 MGA, MGB BANJO TYPE AXLE
- WASHER, THRUST, PINION, .114 MGA, MGB BANJO TYPE AXLE
- WASHER, THRUST, PINION, .116 MGA, MGB BANJO TYPE AXLE
- WASHER, THRUST, PINION, .118 MGA, MGB BANJO TYPE AXLE
- WASHER, THRUST, PINION, .120 MGA, MGB BANJO TYPE AXLE
- WASHER, THRUST, PINION, .122 MGA, MGB BANJO TYPE AXLE
- WASHER, THRUST, PINION, .124 MGA, MGB BANJO TYPE AXLE
- WASHER, THRUST, PINION, .126 MGA, MGB BANJO TYPE AXLE
- WHEEL STUD MGA DISC WHL. A/H
- WHEEL STUD MGA
- YOKE DUST CAP & SEAL MGT, MGA, MGB OUT OF STOCK CAN BE BACK ORDERED
- YOKE, SLIDING, FOR U-JOINT MGT, MGA, MGB,
MGA categories:
We at Little British Car Co and Vintage Motors are dedicated to providing excellent customer service with a "Personal Touch" and quality classic car parts and accessories always at a "substantially lower" price.
|
