|
LBCarCo stocks or can order the following parts for the Jaguar E Type Fuel, Intake & Emissions. Click on the part for pricing and ordering information.
Jaguar E Type Fuel, Intake & Emissions
- ''P'' CLIP
- ''P'' CLIP
- ''P'' CLIP
- 20/40 OIL DECAL
- 3/8 SCREW
- A/C ''TRUMPET''
- A/C BUSHING
- A/C ELBOW
- A/C ELBOW
- ACCELERATOR DROP ARM, LHD
- ACORN NUT
- ADAPTER THROTTLE LINKAGE
- ADAPTER, ROD THROTTLE LINKAGE
- ADAPTOR, V-12
- ADJUSTABLE JET, STROMBERG ZS CARBS FIXED JET NON ADJ NEEDLE
- ADJUSTING SCREW, CARB NEEDLE SOME ZENITH-STROMBERG
- AIR CLEANER
- AIR CLEANER
- AIR CLEANER KIT
- AIR FILTER DECAL ON AIR CLEANER HOUSING
- AIR FILTER KIT E-TYPE SER. I & II
- AIR FILTER KIT, V-12 E-TYPE
- AIR FILTER SET
- AIR FILTER SET
- AIR FILTER SET
- AIR INTAKE
- AIR PUMP, REBUILT (A CORE CHARGE WILL APPLY ON THIS REBUILT PART IF OLD CORE NOT RETURNED WITHIN 20 DAYS OF RECEIPT)
- AIRCLEANER BASE
- AIRCLEANER BOLT V12 E-TYPE
- AIRCLEANER SEAL
- ALLOY RAINSHIELD, EA
- ALLOY WASHER JAGUAR MULTIPLE
- ALTERNATOR, REBUILT (A CORE CHARGE WILL APPLY ON THIS REBUILT PART IF OLD CORE NOT RETURNED WITHIN 20 DAYS OF RECEIPT) MULTIPLE JAG'S
- B-POST PANELS
- BANJO BOLT
- BANJO BOLT, STAINLESS STEEL
- BANJO FITTING
- BANJO, FUEL PUMP USE 370-185 XJ6 -77
- BEARING, CARB JET
- BLANKING PLATE
- BOLT GROMMET JAG V-12 E-TYPE; 8 REQUIRED
- BOLT, 5/16
- BOOT SIDES
- BOTTOM PLATE
- BRACKET, LH V-12 E-TYPE
- BRACKET, RH V-12 E-TYPE
- BREATHER HOSE
- BREATHER HOSE
- BREATHER PIPE EARLY E-TYPE SERIES 1
- BREATHER PIPE LATER E-TYPE SERIES 1
- BREATHER PIPE SERIES 1.5 E TYPE
- BREATHER PIPE STROMBERG CARB E-TYPES
- BREATHER TUBE
- BULKHEAD GASKET
- BUMPER GROMMET
- BUSH, FIREWALL PLATE JAGUAR XKE 4.2, XJ6 69-81
- BUSH, THROTTLE SHAFT, NYLON HD8 SU CARBS
- BYPASS VALVE
- CABLE CLIP USE 365-520
- CALIPER KIT
- CAM SHOE AND ROD ASSEMBLY
- CAP, GAS, LOCKING E-TYPE SERIES 1 & 2 Currently unavailable
- CARB CONVERSION JAGUAR E TYPE V12
- CARB CONVERSION JAGUAR XKE 4.2
- CARB CONVERSION V-12 E TYPE
- CARB KIT XKE V12
- CARB KIT USE 019K XKE/XJ6 4.2 69-77
- CARB PIPE CLIP
- CARB R/B KIT
- CARB STUD
- CARBURETOR GASKET
- CARBURETOR GASKET USE 696-030
- CARBURETOR KIT, E-TYPE HD-8 SUG 375-595
- CARBURETOR SCREW SET
- CARBURETOR SET, HD8 E-TYPE SERIES I
- CARBURETOR STUD
- CHECK VALVE
- CHECK VALVE USE 367-000
- CHOKE CABLE
- CHOKE CABLE
- CHOKE CABLE JAGUAR XKE S II COUPE, ROADSTER
- CHOKE CABLE SERIES II E-TYPE 2+2
- CHOKE CABLE END ASSEMBLY
- CHOKE CABLE TRUNION USE 378-648
- CHOKE CLIP V12 E-TYPE
- CHOKE CONTROL ASSEMBLY
- CHOKE KNOB
- CHOKE KNOB E-TYPE
- CHOKE LEVER
- CHOKE LIGHT DOES NOT INCLUDE BULB OR HOLDER
- CHOKE LINKAGE ASSEMBLY
- CHOKE PLATE
- CHROME BOLT
- CLAMP SET, EMISSIONS HOSES V-12 E-TYPE
- CLAMPING WASHER
- CLIP KIT, V-12 E BRAKES/FUEL
- COLUMN BOOT
- COMETIC 4.2 INTAKE GASKET SEE ALSO C41247JAG
- CONNECTING LEVER SERIES I & II
- CONNECTOR C81
- CONNECTOR ASSY
- CONNECTOR, PIPE
- CONTROL ROD, TRIPPLE SU
- COOLING HOSE
- CORE CHARGE REBUILT ALTERNATOR
- COVER & BRACKET ASSEMBLY, RHD
- COVER TEMP COMP MULTIPLE TR'S, JAG
- CUP WASHER
- CUP WASHER, 1/4
- DAMPER ASSY STROM.CD175 75-
- DAMPER, PLASTIC JAGUAR VARIOUS W- SU HD8 CARBS
- DIAPHRAGM KIT, ZS BYPASS VALVE - STROMBERG CARBURETORS IN STOCK LIMITED SUPPLY
- DIAPHRAGM, FUEL PUMP SU FUEL PUMPS
- DIAPHRAGM, ZS CARB LATER 175CD ZS CARB
- DISHED WASHER HD
- DISTANCE PIECE
- DISTANCE PIECE
- DOOR CAPPINGS
- DOOR POCKETS
- ELBOW HOSE
- ELBOW HOSE
- ESCUTCHEON, HEATER & CHOKE
- FILTER ASSY CLEARANCE ITEM Currently unavailable
- FILTER ASSY, AIR XKE -67
- FILTER ASSY, AIR, W/DECAL TR3,EARLY TR4 (H6)
- FILTER BELLOWS
- FILTER BRACKET
- FILTER BRACKET
- FILTER ELEMENT, AIR - (SAME AS KNNE-2540) MULTI-MARQUE, BRITISH
- FILTER GAUZE
- FILTER KIT E-TYPE EARLY V-12
- FILTER KIT E-TYPE LATE V-12
- FILTER KIT E-TYPE SER. I & EARLY SER. II
- FILTER KIT E-TYPE SER. II
- FILTER, AIR C34348 USE C34348 E V12 71-74
- FITTING KIT V-12 E-TYPE, 8 NUTS/8 FERRULES
- FLOAT ASSY, PREMIUM ZENITH STROMBERG CARBS - NOT TR4-4A
- FLOAT VALVE, GROSE TYPE, Z-S TR7, MGB 75-
- FLOAT, CARBURETTOR, NITROPHYL AHY, JAG, MGA, MG TC-TF, TR2-4
- FLOATVALVE GROSE TYPE SIDEBOWL H, HS, HD SU (NOT HIF)
- FOAM SEAT BACKS
- FORK, HANDBRAKE PADS MOST JAGS
- FRAME STRAP KIT
- FRONT BADGE MADE IN ENGLAND
- FUEL FILLER CAP
- FUEL FILTER ASY
- FUEL FILTER SUG C29445 Currently unavailable
- FUEL LINE ASSY
- FUEL LINE ASSY
- FUEL LINE ASSY FILTER TO CARB INLET PIPE, 3.8 & 4.2 E
- FUEL LINE ASSY JAGUAR XKE 3.8
- FUEL LINE ASSY PUMP TO BULKHEAD, 4.2 E-TYPE
- FUEL LINE, FOOT
- FUEL PICK-UP PLATE & PIPES V-12 E-TYPE
- FUEL PIPE CLIP
- FUEL PIPE CLIP
- FUEL PIPE SET
- FUEL PIPE UNION
- FUEL PUMP KIT
- FUEL PUMP KIT
- FUEL PUMP KIT 3.8 E-TYPE TO 4.2-S
- FUEL PUMP KIT POINTS TYPE, NEGATIVE GROUND
- FUEL PUMP KIT POINTS TYPE, POSITIVE GROUND
- FUEL PUMP KIT ROUND BODY SOLID STATE, NEG GROUND
- FUEL PUMP KIT SOLID STATE, POSITIVE GROUND
- FUEL PUMP MOUNT
- FUEL PUMP MOUNT
- FUEL PUMP, 3.8 E-TYPE, IN-TANK
- FUEL PUMP, NEG GRND, REBUILT SUG 377-255 (A CORE CHARGE WILL APPLY ON THIS REBUILT PART IF OLD CORE NOT RETURNED WITHIN 20 DAYS OF RECEIPT)
- FUEL PUMP, POS GRND, REBUILT SUG 377-245 (A CORE CHARGE WILL APPLY ON THIS REBUILT PART IF OLD CORE NOT RETURNED WITHIN 20 DAYS OF RECEIPT)
- FUEL PUMP, V-12, NEW USE 377-335
- FUEL PUMP, V-12, REBUILT SUG AZX1405EN (A CORE CHARGE WILL APPLY ON THIS REBUILT PART IF OLD CORE NOT RETURNED WITHIN 20 DAYS OF RECEIPT)
- FUEL RAIL
- FUEL RAIL PIPE LATE XK150 'S'; SERIES I E-TYPE
- FUEL SENDER
- FUEL SENDER
- FUEL SENDER, V-12 E-TYPE
- FUEL T SERIES 1.5 & II E-TYPE
- FUEL TANK (Oversize part fee $15) SERIES I, EARLY SERIES II
- FUEL TANK (Oversize part fee $15) V-12 E-TYPE
- FUEL TANK (Oversize part fee $15) XKE 6 CYL 69-71
- FUEL TANK GASKET, ALL E-TYPE
- FUEL TANK SUMP, W/ DRAIN BOLT WITH DRAIN BOLT, LATER
- FULCRUM LEVER
- GAS CAP, LOCKING SPM & MGB THRU 1969, AHY BN4-BJ8,CLASSIC MINI
- GAS CAP, LOCKING, CHROME MGB -69
- GAS PEDAL V-12 E-TYPE, XJ-6, XJ-S
- GAS TANK BOLT
- GASKET, BASE TO AIR PIPE SERIES II
- GASKET, CARB TO MANIFOLD TR250/6
- GASKET, FITTING
- GASKET, FLOAT BOWL H TYPE CARB
- GASKET, FLOAT CHAMBER USE 696-080
- GASKET, FUEL SENDER TWO PIECES
- GASKET, INTAKE-THROTTLE HSG
- GASKET, PLENUM JAG V12 WITH CARBS
- GASKET, THERMO
- GASKET, THERMOSTAT E TYPE 65-68
- GASKET. AUTO CHOKE THERM USE C2475 E-TYPE
- GROMMET ROVER 2000,XJ6
- GROMMET, 1inch
- GROMMET, CHOKE CABLE
- GROMMET, CHOKE CABLES, V-12 E
- H/L NACELLE, LH SERIES I E-TYPE
- H/L NACELLE, RH SERIES I E-TYPE
- HARDWARE KIT
- HARDWARE KIT
- HARDWARE KIT ZIG-ZAG CONNECTOR BETWEEN CARBS
- HARDWARE KIT, RAINSHIELDS V-12 E-TYPE
- HEADLGHT MOLDING,LEFT SERIES II AND III E-TYPE 'EYEBROW'
- HOOD BUFFER PAD MULTIPLE APPLICATION
- HOSE CLIP
- HOSE CLIP
- HOSE FITTING
- HOSE, AIR RAIL TO T (EMISSION) XJ12,XJS
- HOSE, BREATHER COVER XJ6 -78,XJ12 -75
- HOSE, CANISTER
- HOSE, FUEL FILLER E-TYPE
- HOSE, HEATER XJ6
- HOSE, SMOG
- HOSE,CHECK VALVE XJ6
- HOUSING BUSHING THROTTLE HOUSING, 6-CYL E-TYPE
- IGNITION, PERTRONIX
- INSTALLATION KIT, FUEL TANK
- INTAKE GASKET
- INTAKE MANIFOLD
- INTAKE MANIFOLD GASKET
- INTAKE STUD V12
- INTERIOR KIT USE IT-1040BIS
- INTERIOR KIT, BISCUIT XK150 FHC
- JET ASSEMBLY, L/H ROVER, MGB V8
- KICK DOWN CABLE BW-8 AUTOMATIC TRANSMISSION
- KICKDOWN SWITCH JAG
- LAMPS, FOG, PIAA, 4 INCH
- LATCH, V-12 E-TYPE CUBBY BOX SUG BD37358/9
- LEVER C65
- LEVER ASSEMBLY C24767, C24769 AND JOINING HARDWARE
- LEVER ON CARB.
- LEVER ON CARB.
- LEVER ON CARB.
- LEVER, HS THROTTLE MULTIPLE HEALEYS
- LID, FLOAT BOWL AHY, JAG, MGA, MGT, TRI
- LID, FLOAT BOWL AHY, JAG, MGA, MGT, TRI
- LINK BRACKET
- LINKAGE BRACKET SET
- LINKAGE BRACKET, E THROTTLE
- LINKAGE CLIP,THROTTLE VARIOUS JAGS
- LINKAGE KIT
- LINKAGE ROD
- LOCK TAB THROTTLE LINKAGE
- LOCK WASHER
- LUBE DECAL SERIES II AND III E-TYPE
- MANIFOLD GASKET, MULTI-LAYER SUG C2318UPG
- MANIFOLD NUT
- MASTER CARB KIT SERIES I E-TYPE
- MASTER CARB KIT SERIES II E-TYPE OUT OF STOCK CAN BE BACK ORDERED
- MASTER CARB KIT SERIES III V-12 E OUT OF STOCK CAN BE BACK ORDERED
- MASTER CARBURETOR KIT
- METERING NEEDLE
- METERING NEEDLE
- METERING NEEDLE
- METERING NEEDLE
- METERING NEEDLE
- METERING NEEDLE
- METERING NEEDLE
- METERING NEEDLE
- METERING NEEDLE
- METERING NEEDLE E S1&2, 68-EARLY 71, NON ADJ, EARLY XJ6
- MOUNT BRACKET
- MOUNT GROMMET USE C3053
- MOUNT KIT, PUMP
- MOUNT PLATE
- NEEDLE AND SEAT
- NEEDLE AND SEAT TR4- 6
- NEEDLE AND SEAT KIT USE 371-061 AHY, MG T,A,B, TRI, JAG Currently unavailable
- NEEDLE CARB B1E USE B1E XKE 67-68 ZENITH
- NEEDLE LOCKING SCREW
- NEEDLE, CARB B1CQ USE B1CQ MULTIPLE JAG'S
- NUT 1/4 FINE
- NUT M/FOLD - D/PIPE SPRIDGET 1500
- O-RING, FUEL PUMP CURRENT PROD SU ELECTRIC PUMPS
- O-RING, ZS CARB TR4-6
- O-RING,AIR RAIL JAG 12 CYL.
- OIL, CARB DASHPOT, 125 ML - (COMPARE TO C-3241) SU & ZS CARBS
- OLIVE, 3/8''
- P CLIP
- P CLIP
- P CLIP, 1/2 CABLE/PIPE
- PAD, FUEL TANK
- PEDAL ASSEMBLY
- PICKUP PLATE SERIES I & II WITH EXTERNAL PUMP
- PIN & NUT
- PIN, FLOAT
- PIPE CLIP
- PIPE CLIP
- PIPE CLIP
- PIPE, FLOAT CHAMBER OVERFLOW AHY, JAG, MGA,MGT,SPM,TRI
- PISTON ASSEMBLY ZS CARBS W FIXED NEEDLES
- PISTON SPRING
- PISTON SPRING
- PIVOT PIN
- PLUG & SEAL ZENITH-STROMBERG - VARIOUS
- PLUG FLOAT CHAMBER TR 250/6
- PLUG, 1
- PLUG, 1/2inch
- PLUG, 3/4'', RUBBER, BLACK
- PLUG, 5/8
- POINT SET, FUEL PUMP ALL S.U. FUEL PUMPS
- POZIDRIV SCREW, 5/16 X 1 UNC
- PREHEAT DUCT E-TYPE SERIES III V12 1971-74
- PUMP BRACKET
- PUMP FOAM MOUNT PAIR V12 E-TYPE, XJ12 WITH CARBS
- RAINSHIELD BOLT
- REAR BULKHEAD
- REAR PARCEL MAT
- RETAINER 39''
- RETAINING CLIP - ZS CARBS IN STOCK LIMITED SUPPLY
- RETURN SPRING
- ROD END, FORK USE 371-290
- RUBBER
- RUBBER GROMMET XK140/150, LATER MK VII; MK VIII-IX
- SCREEN C69
- SCREW & SPRING
- SCREW MIXTURE
- SCREW NEEDLE LOCKING MULTIPLE
- SCREW W/ WASHER, LONG ZS FLOAT CHAMBER
- SCREW W/WASHER SHORT USE 366-305
- SCREW, 3/16 WHITWORTH S.U.CARBS
- SCREW, MIXTURE MGB
- SCREW, PICK-UP
- SCREW, SENDER
- SCREW, THROTTLE DISC TO SHAFT ALL SU CARBS
- SEAL/RETAINER USE 696-026
- SEAT COVERS
- SENDER GASKET CHOKE AND FAN SWITCHES
- SENDING UNIT, WATER TEMP TR250
- SET SCREW
- SET SCREW
- SHAFT SEAL
- SHAFT,THROTTLE, O/S HD8, OVERSIZE SHAFT
- SHAFT,THROTTLE, HD8, STD HD8, STANDARD SHAFT
- SHOE KIT
- SIDE PANELS
- SLAVE SHAFT
- SLAVE SHAFT 3.8 3.8 E-TYPE FROM (E) R.2934; ALL 3.8 RA ENGINES
- SLAVE SHAFT FRONT, 3.8, ENGINE R.2934-ON
- SLAVE SHAFT LHD 3.8 E-TYPE TO (E) R.2933
- SLEEVE, ECCEN.
- SLOW RUN SCREW KIT MULTI-MARQUE, BRITISH
- SMOG PUMP ASSY (A CORE CHARGE WILL APPLY ON THIS REBUILT PART IF OLD CORE NOT RETURNED WITHIN 20 DAYS OF RECEIPT) XJ6 74-80
- SPACER, Z-S CARB 68- XKE, XJ6,XJ12
- SPEAKER, 4 X 6, 2 WAY, SVC
- SPECIAL WASHER, FUEL PIPES
- SPIRAL BIND
- SPONGE MOUNT 4.2 SERIES I AND II E-TYPE
- SPRING
- SPRING BRACKET CARB RETURN SPRING
- SPRING CLIP SPECIAL ORDER PRICE MAY VARY
- SPRING, ACCELERATOR PEDAL XJ6,XJ12 ALL
- SPRING, E-TYPE CHOKE MECH.
- SPRING, V-12 E PART OF C34824 FUEL VALVE
- SS RAINSHIELD, EA, ORIGINAL V-12 E-TYPE
- STARTER, REBUILT USE C12679/1 (A CORE CHARGE WILL APPLY ON THIS REBUILT PART IF OLD CORE NOT RETURNED WITHIN 20 DAYS OF RECEIPT) JAG 3.8, E TYPE
- STIFFENER PLATE
- STOOL, MG, BLK/WHITE (Oversize part fee $10) MULTIPLE MG'S
- STRIKER PLATE
- STRIKER SHIM
- STUD, LIFT-THE-DOT,SELF TAPPIN
- STUD, MANIFOLD JAG
- SU CONVERSION KIT
- SU SERVICE KIT
- SUMP RING
- SUMP/FILTER KIT
- SUNDRIES KIT THR.SHAFT SU HD TYPE CARBURETOR
- SUSPENSION WASHER
- SWITCH, CHOKE
- SWITCH, LAMP GT6 67-71
- T HOSE, V-12 E-TYPE
- T-KEY CLIP
- T-PIECE
- TAB WASHER
- TAIL LAMP PAD PAIR
- TANK FILTER, W/ SS SCREEN
- TANK SUMP W/O DRAIN BOLT, EARLY
- TEMP. TRANSMITTER E TYPE; WITH KNURLED SCREW-ON TOP
- TEMPERATURE COMPENSATOR MULTIPLE TR'S, JAG
- THERMOSTAT HOUSING 4.2 SERIES I E-TYPE
- THERMOSTAT, 160F, 71C ALL EXCEPT TR7
- THERMOSTAT,BELLOWS/SLEEVE,160F TR2-4A, AH 100, 100-6, 3000, MGA, SPM
- THROTTLE BRACKET
- THROTTLE BUSH
- THROTTLE CABLE LHD V-12 E-TYPE A/T
- THROTTLE CABLE V-12 E-TYPE, MANUAL TRANSMISSION
- THROTTLE DISC
- THROTTLE LINK.
- THROTTLE LINK.
- THROTTLE LINK.
- THROTTLE PEDAL PIVOT LHD V-12 E-TYPE
- THROTTLE ROD
- THROTTLE ROD
- THROTTLE ROD
- THROTTLE SHAFT
- THROTTLE SHAFT
- THROTTLE SHAFT
- THROTTLE SPRING SUG C14366 STAINLESS STEEL, MULTIPLE APPLICATION IN STOCK LIMITED SUPPLY
- THROW-OUT BEARING
- THRUST WASHER
- TRIMMER SCREW USE 365-945
- UNDERFELT KIT
- UNION SCREW SMALL TYPE
- UNION, VAC LINE TO SU CARB AHY JAG MGA TR
- V-12 BRACKET V-12 E-TYPE
- V-12 FUEL SUMP
- V12 INTAKE STUD
- VACUUM FITTING
- VALVE SPRING
- VALVE, FUEL
- VENT HOSE, TANK TO FILLER BOX
- WASHER, 1/4 MULTI-COIL
- WASHER, ALLOY JAGUAR XK'S, E-TYPE, EARLY SEDANS
- WASHER, CARB DAMPER
- WASHER, COPPER, 5/8 ID SPM 948, 1098, 1275, CMI
- WASHER, FIBER, 11/16 ID SU CARBS, SU FUEL PUMPS & MORE NON-SU
- WASHER, FILTER
- WASHER, LOCK, 5/16, SQ CX
- WASHER, STAR
- WASHER,GAS TANK PLUG XJ6,XJ12
- WATER PUMP BELT
- WATER RAIL GSKT JAGUAR XK-150, 3.8 E-TYPE, 3.8 MK X
- WEBER CARB.
- WING NUT E-TYPE
- WOOD RPLCMT KIT
- Y BRACKET
- Y BRACKET
Jaguar E Type categories:
We at Little British Car Co and Vintage Motors are dedicated to providing excellent customer service with a "Personal Touch" and quality classic car parts and accessories always at a "substantially lower" price.
|
